Mobile Treatment Plant for Sludge Dewatering
– Reduce your Sludge
MENA-Water is manufacturer for containerized plants for sludge handling. For every case of application, we offer a solution ready to use: mobile or stationary. All process equipment is arranged inside one 40 feet standard container. This enables us to achieve very short realization time. You will get reliable and tested plants and only need plug and play at site.
BELT PRESS
The belt press with included pre-thickener is completed with polymer preparation, mixer, tanks, pumps included cabling and piping, everything is pre-installed.
Sludge is pumped, stored and polymer is prepared, dosed and mixed to the sludge flow towards the dewatering machine. Upstream there is the screw pre-thickener which performs the initial solid/liquid separation stage, taking sludge solids concentration from 0.5 -3% up to 5-15 %. The dewatering in the following belt press occurs firstly in the low pressure zone, then in the wedge zone and finally in the high pressure zone where the filter cake is compressed between the perforated cylinder cloth and the main cloth. The discharged sludge cake can reach dry solid contents variable from of 18 to 30% depending on the sludge.
FEATURES
- The package plant will handle sludge flow from 2 to 8 m³/hour per single unit
- The dry cake will be 18-30% DS due to type of sludge
- High capacities can be achieved through modular arrangement
MENA-Water offers tailor-made containers to treat sludge from different applications:
- Municipal sludge
- Industrial sludge
- mixed fiber, biological, chemical sludge
- Fast delivery and start-up due to the mobile concept
- Quality equipment in stainless steel
- Compact design
- High packing density
- Very good price-performance ratio
- Low maintenance and minimum operation requirements
- Minimum construction work on site and easy to relocate
SCREW PRESS
Cost-effective sludge dewatering for independence in sludge disposal
The Q-PRESS® is a screw press with a conical screw shaft and cylindrical sieves consisting of three treatment zones: inlet and drive zone, three-part thickening and dewatering zone, and press zone with pneumatic counter-pressure cone.
DRY BAG
For small applications we offer this system using drying bags. The very small footprint of the plant allows best placement.
The package plant is completely automatic, with all functions, including sludge conditioning, bag filling and draining cycles, controlled by an integral control panel. The automatic filled bags also act as strong containers for transport of the dehydrated sludge to the disposal point.
Video of Belt Press Container
MENA-Water Containerized Plants